Digital Camera Caring Tips for Last Long

How to take care of the camera

There is a proverb that if you take care, the gems will match. The care and use of digital cameras reveals the taste of the photographer. And now many people have digital camera 8 in their hands Whether it is autofocus or SLRE 7 Digital SLR (Single Lens Reflect) Camera 7 takes more care Professional photographers use multiple cameras, lenses, bags and equipment. As a result, they have to take special care. Those who take pictures as a hobby should also pay attention to care.

The biggest enemy is water for Camera

The biggest enemy of digital cameras is water. Wet in the rain or submerged in water, the camera is quickly damaged. When water enters the camera, it rusts on the motherboard. As soon as water enters, it should be wiped with a dry cloth or tissue paper. Water usually enters the camera through the place where the eye cap and ribbon are attached In this case, if the camera is switched on, there may be a short circuit. So the camera should be swiped off and dried in the light sun Since the camera is a battery powered device, it is wise to remove the battery as soon as the water enters. When taking pictures near the sea, you have to use the camera very carefully. Salt water quickly damages the camera parts Then the repair work is not done

Be careful at this time!

In the monsoon season, the humidity of the air is high Humid environments can cause fungus to enter the camera and lens. If there is more fungus, there is no light-shadow contrast in the picture. The sharpness of the image decreases. The exact color is not available. If fungus falls on the lens, it should be cleaned at a good service center Abrasions can often cause permanent scratches inside the lens. Moisture also causes rust on various metal parts of the lens. This rust communicates with each other. As a result, the interconnection of electric circuits is stopped.

Injuries are no less common

Dust is one of the enemies of the camera. It is not advisable to change the lens in open space or in dusty places. Due to the opening of the lens, dirt first gets into the part of the mirror Then when the shutter is pressed, the dirt goes to the sensor and accumulates. As a result, black spots may appear on the image. The sensor should be cleaned at least every four months. It is best to have a UV (ultraviolet ray) or SL (Skylight) filter in front of the lens. Filters basically filter the light. If a filter is fitted, dust cannot enter the lens. Putting on the lens cap at the end of the work, keeping the eye cap off and using the lens hood are part of the job.

The temperature stays normal

Cameras and equipment should be kept at normal temperature. It is not advisable to keep the camera in an extra cold place for a long time. When a camera is placed in an air-conditioned room, water vapor accumulates in the lens. As a result, nothing can be seen with the view finder, it looks blurry. Doesn’t want to be the focus easily. It is difficult to take pictures until the water vapor has dried. Hot weather is not as harmful for the camera as people can tolerate. That is why it is not right to keep the camera at extra temperature. Pictures of electric wires, transmitters and fires should be taken from a certain distance. Excessive heat from the fire can cause the lens coating to rupture. As a result, it is foolish to hold the camera unnecessarily near the fire. Many times it is also a suicidal decision

Better battery charge with extra screen on the monitor

Charge the battery regularly. Remove when the charge is complete. Excessive charge often weakens the battery. The battery should be tested (calibrated) every six months. The camera must be switched off to open the memory card, change the lens or change the battery. The flashgun switch should also be turned off after use. It is better to have a transparent screen on the camera monitor. Not accidentally switching off the SLR camera is not a problem. After some time the power becomes standby. However, if the power of the compact camera is on, the lens comes out and creates additional pressure on the camera. So it is better to keep the battery of the compact camera open at the end of work. Using high-speed card readers and memory cards makes work faster. The card should be scanned with anti-virus software when downloading pictures from the memory card to the computer.

Water cannot be put anywhere in the camera, not arbitrary video

Most digital cameras now have video access. However, it is not right to make unnecessary videos. Doing video puts extra pressure on the body of the camera. 12 to 15 minutes of continuous video can be taken with a professional DSLR camera. Then it shuts down. If necessary, the video can be made again with some rest. Occasionally there are errors when using the camera. Error is the inability of the camera or lens to express. The error shows that the lens is not properly connected to the camera In addition, sometimes the aperture can not move when zooming. Can still show errors. Error also appears due to shutter problems.

Lens cap is very useful for camera life

The lifetime of the DSLR camera is determined by the shutter count. Suppose a Canon 1100D camera can take up to 1.5 million pictures. In many cases, two to three times more pictures can be taken than this calculation. Then the shutter breaks. When it changes, it works just like before. As a result, it is not right to press the shutter in unreasonable continuous mode. The shutter is like a screen. It runs on motor. But the professional camera shutter is much stronger.

Cleanliness

The camera should be kept clean after daily use. If you can't finish the work, you need to clean it at least the next day or before you go to take pictures. It is better to turn the matter of wiping into a daily routine. Soft cloth, brush, blower, tissue paper can be kept in the camera bag at all times. Put a little silica gel somewhere in the bag. Lens cleaners can be used to clean the lenses. Cameras, lenses and flashguns should be kept in the camera bag in such a way that one does not put extra pressure on the other. Cameras should not be carried in such bags. Cameras, lenses, etc. should be kept in specially made bags.

Not hurt

Under no circumstances should the camera be hit. Injuries from the outside cause the inner fine joints to move, causing problems. Place the camera in an airtight box or desiccator. Use silica gel in the box. This gel protects the camera and lens from fungus. When silica gel loses its ability to absorb water vapor, its color changes. A camera and two lenses require at least 10 to 15 centimeters of decisor. It is safe to keep the camera on the desiccator. However, sometimes you need to take pictures out. It can be sure whether the camera is active or not.

Blowers can be used to remove dust

Wrap the camera belt around your hand or hang it around your neck while taking pictures. There is no risk of the camera falling to the ground. If you put the camera somewhere, keep it slowly and healthy so that you don't get hurt.

Do not force the lens

Due to being on the shoulder, dirt accumulates in the belt a lot of the time. So do not twist the belt with the lens.

Fill the camera bag after work

Since it is an expensive instrument, it should be carried with caution. The serial number of the camera and lens and the original documents should be stored carefully. It is convenient to get legal help in case of loss.